|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
CHOIR "STICK" MICROPHONES (#CSM)
ACE #CSM-40, #CSM-41, #CSM-60, and #CSM-61 Series Choir “Stick” Microphones offer the ultimate performance of an overhead hanging choir mic in a totally portable configuration. The low profile, light weight, black, aluminum, space age alloy “Stick” mic is available in both 40” and 60” models. The “Boom Stick” places the microphone element ideally above and over any choir. This versatile “Stick” microphone mounts on any standard microphone stand with any standard taper-body mic stand clip. It is extremely stable and will not easily tip over. Two (2) Shure® pick-up elements (115º Cardioid and 130º Supercardioid) and three (3) Audio-Technica® pick-up elements (120º Cardioid, 100º Hypercardioid, and 90º MicroLine) choices mean one will be right for your needs. Use the Choir “Stick” Microphones for children or adult groups on the stage steps, portable risers or anywhere.
The CSM-40 (40” long) and CSM-60 (60” long) Choir “Stick” Microphone features Audio-Technica®‘s miniature back-plate condenser elements while the CSM-41 (40” long) and CSM-61 (60” long) Choir “Stick” Microphone features Shure®’s miniature electret condenser elements. The elements are then assembled into an ultra light weight aluminum boom shaft (.312” Dia.) for long reach, high performance microphone applications. Each “Stick” microphone version is supplied with a Taper-Body Clutch Stand Mount and a U-U Clip ready for use with any standard microphone stand. The Audio-Technica® CSM Mic is a wide range condenser microphone while the Shure® CSM Mic is a miniature electret condenser microphone.
Both series of “Stick” Mics are available with a variety of interchangeable cartridges/elements. All Choir “Stick” Mics are designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup situations. The small-diameter gooseneck design permits highly flexible positioning while maintaining a smooth, well contoured appearance. The Ouptput Connection Power Module for the Audio-Technica® “Stick” microphone is an Integral 3-pin XLRM-type, phased with Phantom Power Requirements of 9-52V dc, 2.0mA typical and an Output Impeadance EIA rated at 200 ohms. The Output Connection Power Module for the Shure® “Stick” microphone is an Integral 3-pin XLRM-type, phased with Phantom Power Requirements of 11-52V dc, 2.0mA typical and an Output Impeadance EIA rated at 200 ohms.
|
|
|
