|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
CUSTOM STAGE POCKET - 144SLBK |
 |
144SLBK |
 |
|
 |
* A/C and panels are optional accessories |
|
 |
 |
 |
 |
 |
 |
UL Listed |
Super |
Connectrix |
Sell |
Specs |
Specs |
 |
DESCRIPTION |
 |
|
144SLBK STAGE POCKET FOR BELOW SURFACE FLOOR PERMANENT INSTALLATION
The ACE Backstage #144SLBK Stage Pocket is configured to receive the RSS 8 channel Digital Snake (S-0808) for on-stage use and storage. The S-0808 slides easily in and out of the nesting frame that secures it for use while in the pocket. Adjacent to the S-0808 well is a panel frame allowing connectivity possibilities for up to 12 audio/video/production connectors, plus a storage well for an external battery pack or PoE component, and a generous raceway for A/C or other high voltage power. The orientation of the interior frame as well as the Lid Bezel assembly can be reversed to allow the AC power and/or storage well to be on the other side of the S-0808.
BASIC CONSTRUCTION INCORPORATES 3 SUB-ASSEMBLIES
#1. LID/BEZEL - Heavy duty welded, 10ga. steel lid and 11ga. steel bezel. A unique assembly with spring loaded hinge pins and (2) hinged cableway slot closures with zinc plating mount directly to the Back Box. Both the lid and bezel are finished with oven cured, texture black powder coat. Standard flush lid, carpet lid, or optional locking lid are available.
#2. BRACKET ASSEMBLY - Made from 18 ga. steel, this 3 piece bracket assembly consisting of the S-0808 well, connector panel mount, AC raceway, and additional storage well can be installed to house the S-0808 with mounted external battery or without. All Bracket Assemblies are finished with oven cured, texture black powder coat.
#3. BACK BOX - Welded 14ga. steel with zinc corrosion resistant finish, 10”W x 18”L x 9”D. The 9” depth allows for cable-end connector clearance above the S-0808 and provides work clearance under the brackets. Combination knock-outs support feed through or distribution junction.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
• Roland S-0808 Stage Pocket Sell Sheet (Adobe® pdf format)
• Roland S-0808 Stage Pocket Body Size = 10.000” W x 9.000” H x 18.000” D
• Roland S-0808 Stage Pocket Lid & Mounting Flange Size = 10.500” W x 0.937” H x 18.500” D
• Roland S-0808 Stage Pocket Connector Capacity = Up to 12 “Connectrix”, Neutrik®, or Switchcraft®*
• Roland S-0808 Stage Pocket Cutout Dimensions = 10.000" W x 18.000" L
• Roland S-0808 Stage Pocket Material = CRS 10/11 Steel and/or Solid Half Hard Brass
Optional Accessories:
• Roland S-0808 Stage Pocket Panel Capacity =
• (2) #PNL-100 Series “CONNECTRIX” Panels OR
• (2) #PSW-100 Series Switchcraft® Panels OR
• (1) #PNL-100 Series “CONNECTRIX” Panel + (1) #PSW-100 Series Switchcraft® Panel
• Roland S-0808 Stage Pocket Panel A/C Capacity =
• (2) #DB Series Cover Plates cover the mounting of (2) Single Gang Edison Duplex receptacles**
*Note: Connector capacity limitations apply depending on connectors and panels used.
**Note: Receptacles not included.
|
|
|
|
|
|
CONNECTORS |
|
|
|
 |
 |
| Connectrix |
Custom Cut |
Switchcraft® |
"CONNECTRIX" Connectors = Neutrik® "D" and Switchcraft® "E" Connector Mounts
Custom Cut Panel Connectors = Custom Cut Connector Mounts
Switchcraft® Connectors = Switchcraft® "D" Connector Mounts
“CONNECTRIX” CONNECTORS COMBINE NEUTRIK® “D” AND SWITCHCRAFT® “E” MOUNTING HOLE PATTERNS FOR GREATER FLEXIBILITY
The “Connectrix” system connectors may be used in any of the “Connectrix” panels utilizing the popular mounting pattern of the Neutrik “D” and Switchcraft “E” series mounting patterns. Connectors using the generous rectangular “Connectrix” cutout will add to a growing array of adapter-mounted standard connectors. The adapter mount is plastic and provides ground isolation between the panel and connector.Click on the links above for our current selection of stock “Connectrix” system connectors.
When ordering, please specify model number and type of connector as well as panel model number (#PNL-100 Series, #PNL-120 Series, #PNL-140 Series, or #PSW-100 Series) the connectors will be loaded into. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 “Connectrix” Horizontal Spaces or 2 or 3 “Connectrix” Vertical Spaces, depending on connectors selected. Connectors may be loaded into panels with nutcerts and nut/bolts or black aluminum pop rivets.
*Note: Connector capacity limitations apply depending on connectors and panels used.
|
|
|
|
|
|
PANELS |
|
|
|
|
|
| Connectrix |
Custom Cut |
Switchcraft® |
"CONNECTRIX" Panels = "Connectrix" Panels combine Neutrik® "D" and Switchcraft® "E" Connector Mounts
Custom Cut Panels = Custom Cut Panels with Custom Connector Mounts
Switchcraft® Panels = Utilize Switchcraft® "D" Connector Mounts
“CONNECTRIX” SYSTEM PANEL DESCRIPTION
Many pre-cut stock #PNL-100 Series, #PNL-120 Series, #PNL-140 Series “Connectrix” System connector panels and #PSW-100 Series Switchcraft® connector panels are available for the Roland S-0808 Stage Pocket. Standard "Connectrix" and Switchcraft® Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16" (.062") or 1/8" (.125") thick. The standard panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Each Standard "Connectrix" and Switchcraft® Panel is finished with oven cured semi-gloss black powder coat.
Most panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. ACE standard panels are flat, strong, and rigid like the typical thinner mild steel panels. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. The machined “Connectrix” style cutouts combine popular mounting patterns of the Neutrik “D” series and Switchcraft “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors. The adapter mount is plastic and provides ground isolation between the panel and connector.
Using the “Connectrix” system panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE panels. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.
|
|
|
|
|
|
PANEL CONFIGURATIONS |
|
| PE |
PNL-100 |
PNL-120 |
PSW-100 |
PNL-140 |
| SERIES PANELS |
SERIES PANELS |
SERIES PANELS |
SERIES PANELS |
SERIES PANELS |
| #PE |
#PNL-100 |
#PNL-120 |
#PSW-100 |
#PNL-140 |
 |
 |
 |
 |
 |
| #FP3E |
#PNL-102 |
#PNL-124 |
#PSW-102 |
 |
 |
 |
 |
 |
 |
 |
#PNL-103 |
#PNL-126 |
#PSW-103 |
#PNL-1425 |
 |
 |
 |
 |
 |
 |
#PNL-104 |
#PNL-128 |
#PSW-104 |
 |
 |
 |
 |
 |
 |
 |
#PNL-105 |
#PNL-1210 |
#PSW-105 |
|
 |
 |
 |
 |
 |
 |
#PNL-106 |
#PNL-1212 |
#PSW-106 |
|
 |
 |
 |
 |
 |
|
INCLUDES |
|
|
• (1) Trim Bezel Mounting Flange
• (1) Stage Pocket Body Back Box
• (1) Lid
• (2) Hinge Pins
• (2) Springs
• (16) #8 Self Tapping Sheet Metal/Wood Screws
• (2) Slot Closures (attached)
|
|
|
|
|
|
ORDERING |
|
|
When ordering Stage Pockets please specify the following:
• Stage Pocket Model Number: Example - #144SLBK
• Stage Pocket Model Name (size): Roland S-0808 Stage Pocket
• Stage Pocket Finish Type (Lid & Mounting Flange): Black, Brass, Copper Vein, Stainless Steel
• Stage Pocket Lid Type: Carpet Lids (CL), Locking Lids (LL), Standard Lids (SL)
• Optional Stage Pocket Panel(s) Model Numbers: Example - #PNL-106/#DB
• Optional Connectors to be loaded into Panel(s): Example - #C15101
• Location of Connectors mounted into Panel(s): Example - Top Left
• Type of Connector Mounts: Nutcerts with Nuts/Bolts or Black Aluminum Pop Rivets
|
|
|
|
|
|
FEATURES |
|
|
2 PANEL/ 12 CONNECTOR CAPACITY: The Roland S-0808 Stage Pocket accomodates #PNL-100 Series Panels and #PSW-100 Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or two (2) optional #PSW-100 Series Panels will mount up to 12 “CONNECTRIX”, Neutrik®, and/or Switchcraft® type connectors*.
DURABLE CONSTRUCTION: All ACE Custom The Roland S-0808 Stage Pocket Trim-Bezel Lid assemblies are heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The 14 ga. (.071") thick CRS steel Roland S-0808 Stage Pocket Back Box is precision die formed and jig welded. The Roland S-0808 Stage Pocket resists bending under even the most severe stage loads.
SPRING LOADED HINGE PINS: Removable spring loaded hinge pins permit easy exchange of lids for Locking Lid (LL) or Standard Lid (SL) and other custom application lids.
CABLE WAY SLOTS: Generous 3/8" x 16" Cable Way Slot permits easy cable exit from pocket(s), even for large gauge cables. Two attached Cable Way Slot Channel Closures closes the slot when not in use.
EASY INSTALLATION: Easy installation into 10” x 18” square cutout in stage floor. Open easy access from the top of the stage pocket allows simple connector/panel terminations.
DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Trim Bezel Lid and Mounting Flange assembly. Textured Black finish is standard. A Solid Brass and Solid Stainless Steel Trim Bezel Lid and Mounting Flange with brushed finishes are also available by special order. Roland S-0808 Stage Pocket Back Box Pocket Body is finished with a clear Zinc, Mil Spec QQ-Z-325E Type I, Class II.
RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle.
|
|
|
|
|
|
FINISHES |
|
|
DECORATOR FINISHES: The Roland S-0808 Stage Pocket from ACE Backstage comes with a scratch/wear resistant finish, oven cured powder coat is electro-staticly applied inside and outside the entire trim-bezel lid assembly. Textured Black finish is standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless Steel Lid and Mounting Flange are also available by special order. The Roland S-0808 Stage Pocket Body Back Box comes with a clear zinc finish (Mil Spec QQ-Z-325E Type I, Class II).
The Roland S-0808 Stage Pocket is available in the following finishes:
• Textured Black Finish
• Solid Brass Lid and Mounting Flange with Brushed Finish*
• Solid Stainless Steel Lid and Mounting Flange with Brushed Finish*
|
|
|
|
|
|
MATERIALS |
|
|
STANDARD POCKET MATERIALS: The Roland S-0808 Stage Pocket Trim-Bezel Lid assembly is a heavy duty welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange. The exception to this is the Brass Roland S-0808 Stage Pocket Lid and Mounting Flange which is made of 1/8" (nominally 11 ga. (.120")) thick Half Hard Solid Brass and the Stainless Steel Roland S-0808 Stage Pocket Lid and Mounting Flange which is made of 1/8" (nominally 11 ga. (.120")) thick Stainless Steel. The 14 ga. (.071") thick CRS steel Roland S-0808 Stage Pocket Body Back Box is precision die formed and jig welded. The Roland S-0808 Stage Pocket resists bending under even the most severe stage loads.
Custom Super Double Wide Stage Pockets are manufactured with the following materials:
• Lids & Mounting Flanges are made of 1/8" (nominally 11 ga. (.120" thick)) CRS Steel
• Pocket Body Back Box is made from 14 ga. (.071" thick) CRS Steel
• Brass Lid & Mounting Flanges are made of 1/8" (nominally 11 ga. (.120")) thick Half Hard Solid Brass
• Stainless Steel Lid & Mounting Flanges are made of 1/8" (nominally 11 ga. (.120")) thick Solid Stainless Steel
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: The Roland S-0808 Stage Pocket Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Roland S-0808 Stage Pocket products.
|
|
|
|
|
|
NOT UL LISTED |
|
|
UL LISTED: UL Listed compliance Standard 514A file FLOOR BOX 44LK Suitable for raised floor applications.
|
|
|
|
|
 |
LINKS |
|
|
|
|
