|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
RACK MOUNT EARS |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
 |
DESCRIPTION |
 |
|
RACK MOUNT EARS FOR MACKIE® MIXERS (#RE-1202, #RE-1402, #RE-1642) GENERAL DESCRIPTION
ACE Rack Mount Ears are designed specifically for MACKIE® mixers. The rack mount ears are manufactured using 16 gauge steel. These rack mount ears will work on a variety of Mackie mixers, including the following model series: #1202-VLZ3, #1402-VLZ3, and #1642-VLZ3.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
DATA SPECS
• RE-1202 Data Specification Sheet (dwg, dxf, or pdf format)
• RE-1402 Data Specification Sheet (dwg, dxf, or pdf format)
• RE-1642 Data Specification Sheet (dwg, dxf, or pdf format)
RACK MOUNT EAR FINISHES
• RE-1202, RE-1402, RE-1642 Rack Mount Ear Finishes = Black powder coat scratch, wear resistant finish
RACK MOUNT EAR MATERIALS
• RE-1202, RE-1402, RE-1642 Rack Mount Ear Material =16 ga. steel precision punched
RACK MOUNT EAR SIZES
• RE-1202 Size = Rack Mount Ear Kit for #1202-VLZ3 Mixer
• RE-1402 Size = Rack Mount Ear Kit for #1402-VLZ3 Mixer
• RE-1642 Size = Rack Mount Ear Kit for #1642-VLZ3 Mixer
|
|
|
|
|
|
CONNECTORS |
|
|
 |
| CONNECTRIX |
Stock "CONNECTRIX" CONNECTORS utilize Neutrik® “D” mounting hole pattern for greater flexibility.
Stock “CONNECTRIX” System Connectors may be used in any stock “CONNECTRIX” System Panel(s). Utilizing the popular mounting pattern of Neutrik® “D” Series connectors with a generous rectangular cutout produces a growing array of adapter-mounted “CONNECTRIX” connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. The current selection of stock “CONNECTRIX” system connectors is constantly changing, so please check out our current product information.
When ordering, please specify connector model number and type of connector as well as panel model number (#MP-100, #PNL-100, #PNL-120, or #PNL-140 Series Panels) the connectors will be loaded into. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 “CONNECTRIX” Horizontal Spaces or 2 or 3 “CONNECTRIX” Vertical Spaces, depending on connectors selected.
|
|
|
|
|
|
PANELS |
|
|
 |
 |
 |
| Connectrix |
Custom Cut |
Switchcraft® |
"CONNECTRIX" Panels = "Connectrix" Panels combine Neutrik® "D" and Switchcraft® "E" Connector Mounts
Custom Cut Panels = Custom Cut Panels with Custom Connector Mounts
Switchcraft® Panels = Utilize Switchcraft® "D" Connector Mounts
“CONNECTRIX” SYSTEM PANEL DESCRIPTION
Many pre-cut stock #PNL-100 Series, #PNL-120 Series “Connectrix” System connector panels and #PSW-100 Series Switchcraft® connector panels are available for the Full Stage Pocket. Standard "Connectrix" and Switchcraft® Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16" (.062") or 1/8" (.125") thick. The standard panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Each Standard "Connectrix" and Switchcraft® Panel is finished with oven cured semi-gloss black powder coat.
Most panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. ACE standard panels are flat, strong, and rigid like the typical thinner mild steel panels. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. The machined “Connectrix” style cutouts combine popular mounting patterns of the Neutrik “D” series and Switchcraft “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors. The adapter mount is plastic and provides ground isolation between the panel and connector.
Using the “Connectrix” system panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE panels. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.
|
|
|
|
|
|
INSTALLATION |
|
|
GENERAL INSTALLATION OF RACK MOUNT EARS (#RE-1202, #RE-1402, #RE-1642)
Rack Mount Ear Kits attach to the mixer using (4) existing chassi screws found at the corners of the mixer. The rack mount ears when properly installed permit the mixer to mount into standard EIA rack rails. Follow the steps listed below for compete installation.
• 1) Disconnect the A.C. power from the mixer
• 2) Remove screws at each corner that match mounting holes provided in the rack mount ears
>>>> CAUTION: DO NOT REMOVE ANY OTHER SCREWS <<<<
• 3) Align the rack mount ears on each side of the mixer to match up with the screw holes
• 4) Attach the rack mount ears with the screws removed in Step 2
>>>> CAUTION: DO NOT OVER TIGHTEN SCREWS <<<<
|
|
|
|
|
|
INCLUDES |
|
|
#RE-1202 RACK MOUNT EAR KIT INCLUDES:
• (1) Pair of Left/Right Rack Ears for #1202-VLZ3 Mixer
• (1) Set of Screws with Self-Locking Nut-washers
#RE-1402 RACK MOUNT EAR KIT INCLUDES:
• (1) Pair of Left/Right Rack Ears for #1402-VLZ3 Mixer
• (1) Set of Screws with Self-Locking Nut-washers
#RE-1642 RACK MOUNT EAR KIT INCLUDES:
• (1) Pair of Left/Right Rack Ears for #1642-VLZ3 Mixer
• (1) Set of Screws with Self-Locking Nut-washers
|
|
|
|
|
|
ORDERING |
|
|
When ordering Rack Mount Ear Kits please specify the following:
• Rack Mount Ear Kit Model Number: Ex. - #RE-1402
• Rack Mount Ear Kit Model Series (size): Ex. - #1402-VLZ3 Mixer from Mackie
|
|
|
|
|
|
ACCESSORIES |
|
|
• n/a
|
|
|
|
|
|
FEATURES |
|
|
DURABLE CONSTRUCTION: Rack Mount Ear Kits (#RE-1202, #RE-1402, #RE-1642) are made from 16 ga. steel and precision punched.
FLEXIBLE MOUNTING: ACE Rack Mount Ear Kits will mount on any standard EIA 19” rack.
VERSATILE APPLICATIONS: Use ACE Rack Mount Ear Kits in portable or permanent facilities.
|
|
|
|
|
|
FINISHES |
|
|
DURABLE FINISH: Black powder coat scratch, wear resistant finish
|
|
|
|
|
|
MATERIALS |
|
|
RACK MOUNT EAR KIT MATERIALS: 16 ga. steel precision punched
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: ACE Rack Mount Ear Kit Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Rack Mount Ear and Shelf Kit products.
• Package 1 - (1) #RE-1202 Rack Mount Kit + (1) #RPL-110 One Space Rack Panel with 10 "CONNECTRIX" Mounts
• Package 2 - (1) #RE-1402 Rack Mount Kit + (1) #RPL-230 Two Space Rack Panel with 30 "CONNECTRIX" Mounts
|
|
|
|
|
|
NOT UL LISTED |
|
|
UL LISTED: UL Listed compliance Standard 514A in combination with inner floor pocket file FLOOR BOX 44LK.
|
|
|
|
|
 |
LINKS |
|
|
|
|
