|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
RACK MOUNT EAR AND SHELF KITS |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
 |
DESCRIPTION |
 |
|
RACK MOUNT EARS & SHELF KITS FOR CD/DVD/TAPE PLAYERS (#ABC-RS2U, #ABC-RS3U) GENERAL DESCRIPTION
Ace Backstage Co. Inc.’s Rack Mount Ears and Shelf Kits are made up of left and right rack mount ears and a shelf pan. The left/right rack ears are fabricated from 16 ga. steel and precision punched to matchup with various tape, CD, and DVD decks and are finished with a black powder coat. The pan is also 16 ga. steel and is finished with the same heat set black powder coat finish as the rack mount ears. The pan lip may be assembled at the front or rear and in the up or down position for rigid support where needed. This kit provides a positive solid attachment of the deck to standard EIA rack rails. Both 2-space and 3-space kits are available. Assembly screws and self-locking nut-washers are included.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
DATA SPECS
• ABC-RS2U and ABC-RS3U Data Specification Sheet (dwg, dxf, or pdf format)
RACK MOUNT EAR AND SHELF KIT FINISHES
• ABC-RS2U and ABC-RS3U Rack Mount Kit Finishes = Black powder coat scratch, wear resistant finish
RACK MOUNT EAR AND SHELF KIT MATERIALS
• ABC-RS2U and ABC-RS3U Rack Mount Kit Material =16 ga. steel precision punched
RACK MOUNT EAR AND SHELF KIT SIZES
• ABC-RS2U Size = 2 Space (Standard EIA Rack Mount Height) Ear Kit
• ABC-RS3U Size = 3 Space (Standard EIA Rack Mount Height) Ear Kit
|
|
|
|
|
|
CONNECTORS |
|
|
 |
| CONNECTRIX |
Stock "CONNECTRIX" CONNECTORS utilize Neutrik® “D” mounting hole pattern for greater flexibility.
Stock “CONNECTRIX” System Connectors may be used in any stock “CONNECTRIX” System Panel(s). Utilizing the popular mounting pattern of Neutrik® “D” Series connectors with a generous rectangular cutout produces a growing array of adapter-mounted “CONNECTRIX” connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. The current selection of stock “CONNECTRIX” system connectors is constantly changing, so please check out our current product information.
When ordering, please specify connector model number and type of connector as well as panel model number (#MP-100, #PNL-100, #PNL-120, or #PNL-140 Series Panels) the connectors will be loaded into. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 “CONNECTRIX” Horizontal Spaces or 2 or 3 “CONNECTRIX” Vertical Spaces, depending on connectors selected.
|
|
|
|
|
|
PANELS |
|
|
 |
 |
 |
| Connectrix |
Custom Cut |
Switchcraft® |
"CONNECTRIX" Panels = "Connectrix" Panels combine Neutrik® "D" and Switchcraft® "E" Connector Mounts
Custom Cut Panels = Custom Cut Panels with Custom Connector Mounts
Switchcraft® Panels = Utilize Switchcraft® "D" Connector Mounts
“CONNECTRIX” SYSTEM PANEL DESCRIPTION
Many pre-cut stock #PNL-100 Series, #PNL-120 Series “Connectrix” System connector panels and #PSW-100 Series Switchcraft® connector panels are available for the Full Stage Pocket. Standard "Connectrix" and Switchcraft® Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16" (.062") or 1/8" (.125") thick. The standard panels mount with (4 or 6) self-tapping screws. Each panel is CNC machined to precisely mate with the designated connectors and in the pocket mounting holes. Each Standard "Connectrix" and Switchcraft® Panel is finished with oven cured semi-gloss black powder coat.
Most panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. ACE standard panels are flat, strong, and rigid like the typical thinner mild steel panels. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. The machined “Connectrix” style cutouts combine popular mounting patterns of the Neutrik “D” series and Switchcraft “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors. The adapter mount is plastic and provides ground isolation between the panel and connector.
Using the “Connectrix” system panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE panels. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.
|
|
|
|
|
|
INSTALLATION |
|
|
GENERAL INSTALLATION OF RACK MOUNT KITS (#ABC-RS2U, #ABC-RS3U)
When properly installed Rack Mount Ear/Shelf Kits attach to standard EIA rack rails using the (6) supplied screws. Rack Kits mounts in standard EIA 19” rack with an open front space up to 17-3/16” wide and an 11” front to back depth. Follow the steps below to compete the installation.
• 1) Disconnect the A.C. power from the deck
• 2) Select location on rack rails and match mounting holes provided on rack mount ears
• 3) With alignment straight attach rack mount ears on each side of the rack rail/case
• 4) Attach the rack mount shelf pan to the rack ears with the remaining screws
• 5) Place the deck on the shelf and reconnect the A.C. power
|
|
|
|
|
|
INCLUDES |
|
|
#ABC-RS2U RACK MOUNT EAR AND SHELF KIT INCLUDES:
• (1) Shelf Pan
• (1) Pair of 2 Space Rack Ears
• (1) Screws with Self-Locking Nut-washers
• Mounts in standard EIA 19” rack with an open front space up to 17-3/16” wide and an 11” front to back depth.
#ABC-RS3U RACK MOUNT EAR AND SHELF KIT INCLUDES:
• (1) Shelf Pan
• (1) Pair of 3 Space Rack Ears
•
(1) Screws with Self-Locking Nut-washers
• Mounts in standard EIA 19” rack with an open front space up to 17-3/16” wide and an 11” front to back depth.
|
|
|
|
|
|
ORDERING |
|
|
When ordering Rack Mount Ear & Shelf Kits please specify the following:
• Rack Mount Kit Model Number: Ex. - #ABC-RS2U
• Rack Mount Kit Model Series (size): Ex. - #ABC-RS2U = 2 - Space
|
|
|
|
|
|
ACCESSORIES |
|
|
• n/a
|
|
|
|
|
|
FEATURES |
|
|
DURABLE CONSTRUCTION: Rack Mount Ear and Shelf Kits (#ABC-RS2U and #ABC-RS3U) are made from 16 ga. steel and precision punched.
FLEXIBLE MOUNTING: ACE Rack Mount Ear and Shelf Kits will mount on any standard EIA 19” rack.
VERSATILE APPLICATIONS: Use ACE Rack Mount Ear and Shelf Kits in portable or permanent facilities.
|
|
|
|
|
|
FINISHES |
|
|
DURABLE FINISH: Black powder coat scratch, wear resistant finish
|
|
|
|
|
|
MATERIALS |
|
|
RACK MOUNT EAR & SHELF KIT MATERIALS: 16 ga. steel precision punched
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: ACE Rack Mount Ear Kit Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Rack Mount Ear and Shelf Kit products.
• Package 1 - (1) #ABC-RS2U 2 Space Rack Mount Kit + (1) #RPL-110 One Space Rack Panel with 10 "CONNECTRIX" Mounts
• Package 2 - (1) #ABC-RS3U 3 Space Rack Mount Kit + (1) #RPL-230 Two Space Rack Panel with 30 "CONNECTRIX" Mounts
|
|
|
|
|
|
NOT UL LISTED |
|
|
UL LISTED: UL Listed compliance Standard 514A in combination with inner floor pocket file FLOOR BOX 44LK.
|
|
|
|
|
 |
LINKS |
|
|
|
|
