|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
PRODUCT SPOTLIGHT - AC ISOLATED BACK BOXES |
 |
 |
WHAT'S UNDER THE SPOTLIGHT? |
 |
| |
NEW AC ISOLATED BACK BOXES
ACE Back Boxes use new form fitting Brackets to precisely mate with Stage Pocket Bodies allowing isolation of High and Low Voltage. Available for use with all ACE 6”, 8”, or 12” deep Back Boxes!
>>> More information
|
|
|
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
• Separates High and Low Voltage in one Stage Pocket
• Works with all ACE Back Boxes*
• Available Pre-installed in Back Boxes or individually for retrofit into existing Stage Pocket/Back Box installs
• Durable Construction -16 gauge Galvaneal Bracket Kit
• Simple Assembly and Installation
• In Stock and Ready to Ship
• CALL FOR DETAILS: 661-295-5760
CLEARANCE VOLUME: Standard Stage Pocket body assemblies are 4.5" deep while the Back Box is 6" deep providing 1.5" work clearance in the bottom of the Back Boxes, making them ideal for feed thru or distribution junctions. Clearance volumes for individual Pocket/Back Box assemblies are as follows:
• #ISO102BBX Back Box with Full Pocket Clearance volume: 144 Cubic Inches
• #ISO104BBX Back Box with Double Wide Pocket Clearance volume: 260 Cubic Inches
• #ISO102DDBBX Back Box with Full Pocket Clearance volume: 722 Cubic Inches
• #ISO104DDBBX Back Box with Double Wide Pocket Clearance volume: 1308 Cubic Inches
• #ISO1028BBX Back Box with Full Pocket Clearance volume: 338 Cubic Inches
• #ISO1048BBX Back Box with Double Wide Pocket Clearance volume: 613 Cubic Inches
DURABLE CONSTRUCTION: ACE Standard Back Boxes (#BBX) are made from tough, welded 14 gauge steel (.071" thick). Ace Standard AC Isolation Brackets (#ISOBRKTx) are made from 16 gauge galvaneal (.064" thick).
EASY INSTALLATION: ACE Standard Back Boxes are easily installed into the floor or stage in a few steps. First make the cutout in the floor/stage. Second, securely brace the Back Box into the floor and be sure to provide support equal to the floor loading requirements, accounting for any height offset required for the finished floor. Third, attach any standard electrical conduit to the back box on any side via the combination knock outs. Fourth, secure Stage Pocket to Back Box using mating screw holes provided on the Stage Pocket flange and the Back Box flange.
DURABLE FINISH: ACE Standard Back Boxes have a clear zinc corrosion resistant finish.
ELECTRICAL KNOCKOUTS: ACE Standard Back Boxes come with standard Electrical Conduit Combination Knockouts. 1/2", 3/4", 1", and 1-1/4" Knock Outs multiple places typical on opposing sides. 1/2" and 3/4" Knock Outs multiple places typical on opposing sides.
PROTECTIVE COVER: Included with the Back Box(es) is a protective cover with a clear zinc corrosion resistant finish. This cover maintains a clean Back Box until the pocket is finally installed. The protective cover may be discarded after the pocket has been installed.
>>> More information
*Not suitable for Mini or Half Back Box applications.
|
|
|
