|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
"CONNECTRIX" #WP-600 SERIES WALL PANELS |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
 |
 |
 |
 |
 |
 |
| Standard |
Super |
Connectrix |
Specs |
Specs |
Specs |
 |
DESCRIPTION |
 |
|
Ace Backstage Co. Inc.'s Stock “CONNECTRIX” System Aluminum Wall Panels (#WP-100, #WP-200, #WP-300, #WP-400, AND #WP-600 Series) mean "CONNECTIVITY" using Neutrik® “D” Mounting Hole Patterns for greater flexibility.
“CONNECTRIX” SYSTEM WALL PANEL DESCRIPTION
The “CONNECTRIX” System expands connectivity possibilities utilizing a unique panel cutout detail and an array of standard and new isolated connectors. This system provides more connectors and mounting options in stock ACE Wall panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated wall panels with off-the-shelf stock prices and immediate delivery. The “CONNECTRIX” Wall Panels (#WP-100, #WP-200, #WP-300, #WP-400, and #WP-600) are flat and strong. The Panels are made from high strength aluminum alloy (6061-T6) that is .062” thick (1/16").
The “CONNECTRIX” Wall Panels are machined, powder coated, and in stock for immediate delivery. The panels may be preloaded with “CONNECTRIX” connectors and engraved with your specifications, creating a unique, customized panel with a short delivery time.
Using the “CONNECTRIX” System Wall Panel it is possible to mount various combinations of “CONNECTRIX” Connectors without a single custom punch. By implementing the #C-15100, #C-25100, or #C-26100 Series of connectors, ACE can create a custom Wall Panel that will work in most any installation applications. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. All ACE “CONNECTRIX” System Wall Panels will mount in Standard Gang Wall Mounts and each is supplied with #6 screws.
Many pre-cut stock #WP-100, #WP-200, #WP-300, #WP-400, and #WP-600 Series “CONNECTRIX” System Wall Panels are stocked and available for immediate loading and engraving. Standard "CONNECTRIX" Wall Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/16" (.062") thick. The standard panels mount with (4 or 8) #6 screws. Each panel is CNC machined to precisely mate with the designated connectors and in Standard Gang Wall mounting holes. Each Standard "CONNECTRIX" Wall Panel is finished with oven cured semi-gloss black or white powder coat.
Most wall panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled. ACE standard wall panels are flat, strong, and rigid like the typical thinner mild steel panels. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. The machined “CONNECTRIX” cutouts combine popular mounting patterns of the Neutrik® “D” series and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors. The adapter mount is plastic and provides ground isolation between the panel and connector.
Using the “CONNECTRIX” system wall panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE wall panels. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
• WP-600 Data Specification Sheet (AutoCAD® dwg or dxf format)
• WP-6012 Data Specification Sheet (AutoCAD® dwg or dxf format)
• WP-6016 Data Specification Sheet (AutoCAD® dwg or dxf format)
• WP-600 Series Panel Connector Capacity = Up to 16 “CONNECTRIX” Connectors
• WP-600 Series Panel Finish = Oven cured, semi-gloss, black or white powder coat
• WP-600 Series Panel Material = 1/16" Thick Aluminum Alloy (6061-T6)
• WP-600 Series Panel Size = 11.812” W x 4.500” H
|
|
|
|
|
|
CONNECTORS |
|
|
 |
| CONNECTRIX |
Stock "CONNECTRIX" CONNECTORS utilize Neutrik® “D” mounting hole pattern for greater flexibility.
Stock “CONNECTRIX” System Connectors may be used in any stock “CONNECTRIX” System Panel(s). Utilizing the popular mounting pattern of Neutrik® “D” and Switchcraft® “E” Series connectors with a generous rectangular cutout produces a growing array of adapter-mounted “CONNECTRIX” connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. The current selection of stock “CONNECTRIX” system connectors is constantly changing, so please check out our current product information.
When ordering, please specify connector model number and type of connector as well as panel model number (#WP-100, #WP-200, #WP-300, #WP-400, or #WP-600 Series Panels) the connectors will be loaded into. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 “CONNECTRIX” Horizontal Spaces or 2 or 3 “CONNECTRIX” Vertical Spaces, depending on connectors selected.
|
|
|
|
|
|
WALL PANEL CAPACITY - #WP-600 SERIES WALL PANELS |
|
|
• #WP-600 Wall Panels accept up to (16) "CONNECTRIX" Connectors
• #WP-6012 Wall Panels accept up to (12) "CONNECTRIX" Connectors
• #WP-6016 Wall Panels accept up to (16) "CONNECTRIX" Connectors
|
|
|
|
|
|
INSTALLATION |
|
|
Stock "CONNECTRIX" System #WP-600 Series Wall Panels mount with (8) eight #6 screws. Each wall panel is CNC machined to precisely mate with the designated connectors and in standard gang wall mounting holes. |
|
|
|
|
|
INCLUDES |
|
|
• (1) #WP-600 Series Panel
• (8) #6 Screws
|
|
|
|
|
|
ORDERING |
|
|
When ordering Wall Panels please specify the following:
• Wall Panel Model Number: Ex. - #WP-6016
• Wall Panel Model Series (size): Ex. - #WP-600 Series "CONNECTRIX" Wall Panel
• Optional Connectors to be loaded into Panel(s): Ex. "CONNECTRIX" #C-15101
• Connector Position Reference Number (CPRN): Location of "CONNECTRIX" Connectors to be mounted into Wall Panel(s): Ex. - CPRN: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, or 16.
• Connector Mounts: Black Aluminum Pop Rivets or removable machine screws & locking nuts
|
|
|
|
|
|
FEATURES |
|
|
FLEXIBLE CONNECTOR MOUNT: WP-300 Series "CONNECTRIX" Wall Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Wall Panels are machined from tough 1/16" thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Wall Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
EXTRA-LARGE CONNECTOR CAPACITY: One (1) #WP-6016 "CONNECTRIX" Wall Panel will mount up to 16 "CONNECTRIX" Connectors.
EASY INSTALLATION: Standard "CONNECTRIX" Wall Panels mount with (8) #6 screws. Each Wall Panel is CNC machined to precisely mate with the designated connectors and in standard gang wall mounting holes.
DURABLE FINISH: Oven cured, semi-gloss, black or white powder coat.
CUSTOM ENGRAVING: Most Wall Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Wall Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery. |
|
|
|
|
|
FINISHES |
|
|
DURABLE FINISH: Oven cured, semi-gloss, black or white powder coat finish.
|
|
|
|
|
|
MATERIALS |
|
|
STANDARD PANEL MATERIALS: ACE WP-600 Series Wall Panels are made from high strength aluminum alloy (6061-T6) that is .062” thick (1/16").
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: ACE #WP-600 Series Wall Panel Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Panel and Connector products.
• Package 1 - (1) #WP-6012 Wall Panel + (12) "CONNECTRIX" Connectors
• Package 2 - (1) #WP-6016 Wall Panel + (16) "CONNECTRIX" Connectors
|
|
|
|
|
 |
LINKS |
|
|
|
|
