|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
"CONNECTRIX" #PE SERIES ELECTRIC POCKET PANELS |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
 |
 |
 |
 |
 |
 |
| Standard |
Super |
Connectrix |
Specs |
Specs |
Specs |
 |
DESCRIPTION |
 |
|
Ace Backstage Co. Inc.'s Stock Electric Aluminum/Steel Pocket Panels (#FP2E, #FP3E, and #PE SERIES) mean "CONNECTIVITY" using standard one, two, and three gang Edison duplex outlets and switch boxes.
ELECTRIC POCKET PANEL DESCRIPTION
Standard 110VAC connections in ACE pockets is easy using compliant switch boxes and panel assemblies. The #PE (single gang box and panel), #FP2E (double gang box and panel), and the #FP3E (three gang box and panel) provide for one, two, or three standard duplex outlets, respectively. These items are UL listed in conjunction with UL listed ACE pockets. When properly installed with isolating AC wiring conduit, combining low voltage connections in the same pocket should not be an issue. Consult your local building codes for any specific application. Each assembly is complete with single duplex, double duplex, or triple duplex switch boxes, black powder-coated steel mounting plates, and narrow aluminum and/or steel black powder-coated cover plates with mounting screws. The #FP2E, #FP3E, and #PE will mount separately or in combination in ACE Half, Full, Double Wide, and Super Double Wide Stage Pockets. The Electric Aluminum and Steel Pocket Panels are machined, powder coated, and in stock for immediate delivery. Using the Electric Pocket Panel it is possible to mount one, two, or three gang Edison Duplex Outlets and switchboxes within ACE Stage Pockets.
Pre-cut stock Electric Pocket Mounting Panels are created from high strength, tough, steel that is 1/16" (.062") thick. The standard panels mount with (4 or 6) self-tapping screws. Each panel is fabricated to precisely mate within the pocket mounting holes. Each Standard Electric Pocket Panel is finished with oven cured semi-gloss black powder coat. ACE electric pocket panels are flat, strong, rigid and provide for quick mounting and wiring of standard 110VAC connections. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
• FP2E Data Specification Sheet (AutoCAD® dwg or dxf format)
• FP3E Data Specification Sheet (AutoCAD® dwg or dxf format)
• PE Data Specification Sheet (AutoCAD® dwg or dxf format)
• F23E Series Panel Edison Duplex Outlet Capacity = 2 Gang Edison Duplex Outlets
• FP3E Series Panel Edison Duplex Outlet Capacity = 3 Gang Edison Duplex Outlets
• PE Series Panel Edison Duplex Outlet Capacity = 1 Gang Edison Duplex Outlet
• FP2E, FP3E, PE Series Panel Finish = Oven cured, semi-gloss, black powder coat
• FP2E, FP3E, PE Series Mounting Panel Material = 1/16" Thick Steel
• FP2E, FP3E, PE Series Cover Panel Material = 1/16" Thick Steel
• FP2E Series Panel Size = 7.375” W x 4.500” H
• FP3E Series Panel Size = 7.375” W x 4.500” H
• PE Series Panel Size = 3.687” W x 4.500” H
|
|
|
|
|
|
POCKET PANEL CAPACITY - #FP2E, #FP3E, and #PE SERIES ELECTRIC POCKET PANELS |
|
|
• #123xxxx Pocket accepts up to (1) #PE Series Electric Panel
• #122xxxx Pocket accepts up to (2) #PE Series Electric Panel
• #124xxxx Pocket accepts up to (4) #PE Series Electric Panel
• #132xxxx Pocket accepts up to (0) #PE Series Electric Panel
• #134xxxx Pocket accepts up to (8) #PE Series Electric Panel
• #123xxxx Pocket accepts up to (0) #FP2E or #FP3E Series Electric Panels
• #122xxxx Pocket accepts up to (1) #FP2E or #FP3E Series Electric Panels
• #124xxxx Pocket accepts up to (2) #FP2E or #FP3E Series Electric Panels
• #132xxxx Pocket accepts up to (0) #FP2E or #FP3E Series Electric Panels
• #134xxxx Pocket accepts up to (4) #FP2E or #FP3E Series Electric Panels*
*#FP2E, #FP3E, and #PE Series Panels will require use of shallow switch boxes in this pocket |
|
|
|
|
|
POCKET PANEL CAPACITY CONFIGURATIONS |
|
|
INSTALLATION |
|
|
Stock Electric Pocket Panels #FP2E, #FP3E, and #PE Series Panels mount with (4) four or (6) six self-tapping screws. Each panel is made to precisely mate within the pocket mounting holes. |
|
|
|
|
|
INCLUDES |
|
|
• (1) #FP2E, #FP3E, or #PE Series Panel
• (6) Self Tapping Screws
|
|
|
|
|
|
ORDERING |
|
|
When ordering Electric Stage Pocket Panels please specify the following:
• Pocket Panel Model Number: Ex. - #FP3E
• Pocket Panel Model Series (size): Ex. - #FP3E Series Electric Pocket Panel
|
|
|
|
|
|
FEATURES |
|
|
FLEXIBLE 110VAC MOUNT: FP2E, FP3E, and PE Series Electric Pocket Panels utilize a custom machined mounting panel with cover panels which allow mounting of 1, 2, or 3 gang Edison Duplex outlets.
DURABLE CONSTRUCTION: ACE Electric Pocket Panels are made from tough 1/16" thick Steel. Stock Electric Pocket Panels are flat, strong, and rigid. ACE Electric Pocket Panels are machine punched and ready for installation.
SMALL, MEDIUM, and LARGE EDSION DUPLEX OUTLET CAPACITY: One (1) #FP2E Panel will mount 2 Edison Duplex Outlets, (1) #FP3E Panel will mount 3 Edison Duplex Outlets, and (1) #PE Panel will mount 1 Edison Duplex Outlet.
EASY INSTALLATION: Standard Electric Pocket Panels mount with (4 or 6) self-tapping screws. Each Electric Pocket Panel is made to precisely mate within the pocket mounting holes.
DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
CUSTOM PANELS AT A LOWER COST: The Stock Electric Pocket Panels expand connectivity possibilities by providing more 110VAC mounting options in stock ACE Pocket Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery. |
|
|
|
|
|
FINISHES |
|
|
DURABLE FINISH: Oven cured, semi-gloss, black powder coat finish.
|
|
|
|
|
|
MATERIALS |
|
|
STANDARD PANEL MATERIALS: ACE #FP2E, #FP3E, and #PE Series Electric Pocket Mounting Panels are made from high strength steel that is .062” thick. ACE #FP2E and #FP3E Electric Panel Mounting Covers are made from high strength aluminum alloy (6061-T6) that is .062” thick.
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: ACE #FP2E, #FP3E, and #PE Series Stage Pocket Panel Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Panel and Stage Pocket products.
• Package 1 - Full Stage Pocket with Standard Lid + (1) #PNL-106 Panel and (1) #PE Electric Panel
• Package 2 - Full Stage Pocket with Carpet Lid + (1) #PNL-106 Panel and (1) #PE Electric Panel
• Package 3 - Full Stage Pocket with Standard Lid + (1) #FP3E Electric Panel
• Package 4 - Full Stage Pocket with Carpet Lid + (1) #FP3E Electric Panel
|
|
|
|
|
 |
LINKS |
|
|
|
|
