|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
BACK BOXES, STANDARD |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
 |
 |
 |
 |
 |
 |
| Standard |
UL Listed |
Connectrix |
Specs |
Specs |
Specs |
 |
DESCRIPTION |
 |
|
STANDARD BACK BOXES (#BBX) GENERAL DESCRIPTION
The #025BBX, #102BBX, #103BBX and #104BBX Back Boxes are welded 14 gauge steel with a protective cover that is discarded when the pocket body is finally installed. The box and cover have a clear zinc corrosion resistant finish. A 1/2” mounting flange is predrilled to mate with the pocket body flange (#025BBX Back Box has a 7/16" mounting flange also predrilled to mate with Mini pocket body flange). The pocket body assembly is 4.5” deep and the back box is 6” deep providing a 1.5” work clearance in the bottom of the back box (ideal for feed thru or distribution junction). The Mini pocket body assembly is 2.25" deep and the Mini back box is 3.5" deep providing a 1.25" work clearance in the bottom of the back box.
The clearance volume (volume between bottom of pocket body and bottom of back box) is 260 cubic inches in the #104BBX, 144 cubic inches in the #102BBX, 92 cubic inches in the #103BBX, and 22 cubic inches in the #025BBX. ACE Back Boxes come with standard Electrical Conduit Combination 1/2”, 3/4”, 1”, and 1-1/4” Knock Outs, 2 places typical on opposing sides and Electrical Conduit Combination 1/2” and 3/4” Knock Outs, 1 place typical on opposing sides (see spec sheets). The #025BBX Back Boxes come with 1/2" and 3/4" Knock Outs, 2 places typical on opposing sides, 6 places typical on opposing sides, and 3 bottom Knock Outs.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
DOWNLOAD SPECS
• 025BBX Data Specification Sheet (dwg, dxf, or pdf format)
• 025BBX/AC Data Specification Sheet (dwg, dxf, or pdf format)
• 102BBX Data Specification Sheet (dwg, dxf, or pdf format)
• 103BBX Data Specification Sheet (dwg, dxf, or pdf format)
• 104BBX Data Specification Sheet (dwg, dxf, or pdf format)
BACK BOX STAGE POCKET CAPACITITES
• 025BBX Series Back Box Capacity = 1 Mini Stage Pocket
• 025BBX/AC Series Back Box Capacity = 1 Mini Stage Pocket
• 102BBX Series Back Box Capacity = 1 Full Stage Pocket
• 103BBX Series Back Box Capacity = 1 Half Stage Pocket
• 104BBX Series Back Box Capacity = 1 Double Wide Stage Pocket
BACK BOX FINISHES
• BBX Series Back Box Finishes = Clear zinc corrosion resistant finish
BACK BOX MATERIALS
• BBX Series Back Box Material = 14 Gauge Steel (.071" Thick)
BACK BOX SIZES
• 025BBX Series Back Box Size = 3.750” W x 3.500” H x 5.750" L
• 025BBX/AC Series Back Box Size = 3.750” W x 3.500” H x 5.750" L
• 102BBX Series Back Box Size = 10.000” W x 6.000” H x 10.000" L
• 103BBX Series Back Box Size = 6.500” W x 6.000” H x 10.000" L
• 104BBX Series Back Box Size = 10.000” W x 6.000” H x 18.000" L
|
|
|
|
|
|
CONNECTORS |
|
|
 |
| CONNECTRIX |
Stock "CONNECTRIX" CONNECTORS utilize Neutrik® “D” mounting hole pattern for greater flexibility.
Stock “CONNECTRIX” System Connectors may be used in any stock “CONNECTRIX” System Panel(s). Utilizing the popular mounting pattern of Neutrik® “D” Series connectors with a generous rectangular cutout produces a growing array of adapter-mounted “CONNECTRIX” connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. The current selection of stock “CONNECTRIX” system connectors is constantly changing, so please check out our current product information.
When ordering, please specify connector model number and type of connector as well as panel model number (#MP-100, #PNL-100, #PNL-120, or #PNL-140 Series Panels) the connectors will be loaded into. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 “CONNECTRIX” Horizontal Spaces or 2 or 3 “CONNECTRIX” Vertical Spaces, depending on connectors selected.
|
|
|
|
|
|
BACK BOX STAGE POCKET CAPACITY - #BBX SERIES BACK BOXES |
|
|
• #025BBX Back Box accepts (1) #025 Series Mini Stage Pocket
• #025BBX/AC Back Box accepts (1) #025 Series Mini Stage Pocket
• #102BBX Back Box accepts (1) #122 Series Full Stage Pocket
• #103BBX Back Box accepts (1) #123 Series Half Stage Pocket
• #104BBX Back Box accepts (1) #124 Series Double Wide Stage Pocket
|
|
|
|
|
|
INSTALLATION |
|
|
GENERAL INSTALLATION OF BACK BOXES (#BBX)
The #025BBX, #102BBX, #103BBX and #104BBX Back Boxes are designed exclusively for use with ACE Mini, Full, Half, and Double Wide Pockets, respectively. Set the back box securely braced into the floor to provide support equal to the floor loading requirements, accounting for any height offset required for the finished floor. Standard electrical conduit may be connected to the back box on any side via combination knock-outs. The protective cover is discarded when the finished pocket is installed. Mating screw holes are provided to secure the pocket flange to the back box flange.
|
|
|
|
|
|
INCLUDES |
|
|
• (1) #BBX Series Back Box
• (1) Disposable Protective Cover
• (4) Self Tapping Screws
|
|
|
|
|
|
ORDERING |
|
|
When ordering Back Boxes please specify the following:
• Back Box Model Number: Ex. - #102BBX
• Back Box Model Series (size): Ex. - #102BBX Series Full Pocket Back Box
• Optional Pockets for loading into Back Box(es): Ex. #122SLBK
|
|
|
|
|
|
FEATURES |
|
|
CLEARANCE VOLUME: Standard Stage Pocket body assemblies are 4.5" deep while the Back Box is 6" deep providing 1.5" work clearance in the bottom of the Back Boxes, making them ideal for feed thru or distribution junctions. Clearance volumes for individual Pocket/Back Box assemblies are as follows:
• #025BBX Back Box with Mini Pocket Clearance volume: 22 Cubic Inches
• #102BBX Back Box with Full Pocket Clearance volume: 144 Cubic Inches
• #103BBX Back Box with Half Pocket Clearance volume: 92 Cubic Inches
• #104BBX Back Box with Double Wide Pocket Clearance volume: 260 Cubic Inches
DURABLE CONSTRUCTION: ACE Standard Back Boxes (#BBX) are made from tough, welded 14 gauge steel (.071" thick).
EASY INSTALLATION: ACE Standard Back Boxes are easily installed into the floor or stage in a few steps. First make the cutout in the floor/stage. Second, securely brace the Back Box into the floor and be sure to provide support equal to the floor loading requirements, accounting for any height offset required for the finished floor. Third, attach any standard electrical conduit to the back box on any side via the combination knock outs. Fourth, secure Stage Pocket to Back Box using mating screw holes provided on the Stage Pocket flange and the Back Box flange.
DURABLE FINISH: ACE Standard Back Boxes have a clear zinc corrosion resistant finish.
ELECTRICAL KNOCKOUTS: ACE Standard Back Boxes come with standard Electrical Conduit Combination Knockouts. 1/2", 3/4", 1", and 1-1/4" Knock Outs 2 places typical on opposing sides. 1/2" and 3/4" Knock Outs 1 place typical on opposing sides. The #025BBX Back Boxes come with 1/2" and 3/4" Knock Outs, 2 places typical on opposing sides, 6 places typical on opposing sides, and 3 bottom Knock Outs.
PROTECTIVE COVER: Included with the Back Box(es) is a protective cover with a clear zinc corrosion resistant finish. This cover maintains a clean Back Box until the pocket is finally installed. The protective cover may be discarded after the pocket has been installed. |
|
|
|
|
|
FINISHES |
|
|
DURABLE FINISH: Clear Zinc corrosion resistant finish.
|
|
|
|
|
|
MATERIALS |
|
|
STANDARD BACK BOX MATERIALS: ACE Standard Back Boxes (#BBX) are made from tough, welded 14 gauge steel (.071" thick).
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: ACE Standard Back Box Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Stage Pocket and Back Box products.
• Package 1 - Full Stage Pocket with Standard Lid + (1) #PNL-106 Panel + (1) #PE Panel + (1) #102BBX Back Box
• Package 2 - Full Stage Pocket with Standard Lid + (1) #PNL-1212 Panel + (1) #102BBX Back Box
|
|
|
|
|
|
UL LISTED |
|
|
UL LISTED: UL Listed compliance Standard 514A in combination with inner floor pocket file FLOOR BOX 44LK.
|
|
|
|
|
 |
LINKS |
|
|
|
|
