|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
BACK BOXES, POLYURETHANE ENCAPSULATED (WET) EXTRA DEEP |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
 |
 |
 |
 |
 |
 |
| Standard |
UL Listed |
Connectrix |
Specs |
Specs |
Specs |
 |
DESCRIPTION |
 |
|
POLYURETHANE ENCAPSULATED EXTRA DEEP BACK BOXES (#SOW) GENERAL DESCRIPTION
Polyurethane encapsulated back boxes are available to provide extra protection from incursion of moisture and water by sealing seams, knock-outs, and holes. Using our extra deep, double zinc plated back boxes (SO) a 1/16" thick jacket of polyurethane is applied to the exterior sides and bottom of the back boxes, permanently bonding with surfaces to form a moisture resistant seal. The polyurethane back box provides protection against harsh climate, chemicals, impact and abrasion. All polyurethane back boxes will have a model number suffix of "W".
ACE polyurethane encapsulated Extra Deep Back Boxes (#SO-200W and #SO-201W) are slightly deeper (8”) as compared with Standard #BBX Series Back Boxes (6”) and may be used exclusively with ACE Full and Double Wide Stage Pockets. The #SO-200W and #SO-201W polyurethane encapsulated Extra Deep Back Boxes are welded 14 gauge steel with a protective cover that is discarded when the pocket body is finally installed. The box and cover have a clear zinc corrosion resistant finish. A 1/2” mounting flange is predrilled to mate with the pocket body flange. The pocket body assembly is 4.5” deep and the extra deep back box is 8” deep providing a 3.5” work clearance in the bottom of the back box (ideal for feed thru or distribution junction).
The clearance volume (volume between bottom of pocket body and bottom of the extra deep back box) is 338 cubic inches in the #SO-200W and 613 cubic inches in the #SO-201W. ACE polyurethane encapsulated Extra Deep Back Boxes come with standard Electrical Conduit Combination 1/2”, 3/4”, 1”, and 1-1/4” Knock Outs, 4 places typical on opposing sides and Electrical Conduit Combination 1/2”, 3/4”, 1”, and 1-1/4” Knock Outs, 2 places typical on one side.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
DOWNLOAD SPECS
• SO-200W Data Specification Sheet (dwg, dxf, or pdf format)
• SO-201W Data Specification Sheet (dwg, dxf, or pdf format)
BACK BOX STAGE POCKET CAPACITITES
• SO-200W Series Back Box Capacity = 1 Full Stage Pocket
• SO-201W Series Back Box Capacity = 1 Double Wide Stage Pocket
BACK BOX COATING
• SOW Series Back Box Coating = Black 1/16" thick coating of polyurethane
BACK BOX FINISHES
• SOW Series Back Box Finishes = Clear zinc corrosion resistant finish
BACK BOX MATERIALS
• SOW Series Back Box Material = 14 Gauge Steel (.071" Thick)
BACK BOX SIZES
• SO-200W Series Back Box Size = 10.000” W x 8.000” H x 10.000" L
• SO-201W Series Back Box Size = 10.000” W x 8.000” H x 18.000" L
|
|
|
|
|
|
CONNECTORS |
|
|
 |
| CONNECTRIX |
Stock "CONNECTRIX" CONNECTORS utilize Neutrik® “D” mounting hole pattern for greater flexibility.
Stock “CONNECTRIX” System Connectors may be used in any stock “CONNECTRIX” System Panel(s). Utilizing the popular mounting pattern of Neutrik® “D” Series connectors with a generous rectangular cutout produces a growing array of adapter-mounted “CONNECTRIX” connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. The current selection of stock “CONNECTRIX” system connectors is constantly changing, so please check out our current product information.
When ordering, please specify connector model number and type of connector as well as panel model number (#MP-100, #PNL-100, #PNL-120, or #PNL-140 Series Panels) the connectors will be loaded into. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 “CONNECTRIX” Horizontal Spaces or 2 or 3 “CONNECTRIX” Vertical Spaces, depending on connectors selected.
|
|
|
|
|
|
BACK BOX STAGE POCKET CAPACITY - #SO SERIES BACK BOXES |
|
|
• #SO-200W Back Box accepts (1) #122 Series Full Stage Pocket
• #SO-201W Back Box accepts (1) #124 Series Double Wide Stage Pocket
|
|
|
|
|
|
INSTALLATION |
|
|
GENERAL INSTALLATION OF BACK BOXES (#SOW)
The #SO-200W and #SO-201W polyurethane encapsulated Extra Deep Back Boxes are designed exclusively for use with ACE Full and Double Wide Stage Pockets, respectively. Set the extra deep back box securely braced into the floor to provide support equal to the floor loading requirements, accounting for any height offset required for the finished floor. Standard electrical conduit may be connected to the back box on any side via combination knock-outs. The protective cover is discarded when the finished pocket is installed. Mating screw holes are provided to secure the pocket flange to the back box flange.
|
|
|
|
|
|
INCLUDES |
|
|
• (1) #SO-200W Series Back Box
• (1) Disposable Protective Cover
• (4) Self Tapping Screws
|
|
|
|
|
|
ORDERING |
|
|
When ordering Back Boxes please specify the following:
• Back Box Model Number: Ex. - #SO-200W
• Back Box Model Series (size): Ex. - #SO-200W Series Extra Deep Full Pocket Back Box
• Optional Pockets for loading into Back Box(es): Ex. #122SLBK
|
|
|
|
|
|
FEATURES |
|
|
MOISTURE PROTECTION: ACE polyurethane encapsulated back boxes are made from our standard extra deep, double zinc plated back boxes (SO). A 1/16” thick jacket of polyurethane is applied to the exterior sides and bottom of the Back Boxes. The polyurethane encapsulates and permanently bonds with the back box surfaces providing protection against the harsh climate, chemicals, accidental impacts, and abrasions.
CLEARANCE VOLUME: Standard Stage Pocket body assemblies are 4.5" deep while the polyurethane encapsulated Extra Deep Back Box is 8" deep providing 3.5" work clearance in the bottom of the Extra Deep Back Boxes, making them ideal for feed thru or distribution junctions. Clearance volumes for individual Pocket/Extra Deep Back Box assemblies are as follows:
• #SO-200W Back Box with Full Pocket Clearance volume: 338 Cubic Inches
• #SO-201W Back Box with Double Wide Pocket Clearance volume: 613 Cubic Inches
DURABLE CONSTRUCTION: ACE polyurethane encapsulated Extra Deep Back Boxes (#SOW) are made from tough, welded 14 gauge steel (.071" thick).
EASY INSTALLATION: ACE polyurethane encapsulated Extra Deep Back Boxes are easily installed into the floor or stage in a few steps. First make the cutout in the floor/stage. Second, securely brace the Back Box into the floor and be sure to provide support equal to the floor loading requirements, accounting for any height offset required for the finished floor. Third, attach any standard electrical conduit to the back box on any side via the combination knock outs. Fourth, secure Stage Pocket to Back Box using mating screw holes provided on the Stage Pocket flange and the Back Box flange.
DURABLE FINISH: ACE Back Boxes have a clear zinc corrosion resistant finish (before applying the Polyurethane Encapsulation).
ELECTRICAL KNOCKOUTS: ACE Standard Extra Deep Back Boxes come with standard Electrical Conduit Combination Knockouts. 1/2", 3/4", 1", and 1-1/4" Knock Outs 4 places typical on opposing sides. 1/2”, 3/4”, 1”, and 1-1/4” Knock Outs 2 places typical on one side.
PROTECTIVE COVER: Included with the polyurethane encapsulated Extra Deep Back Box(es) is a protective cover with a clear zinc corrosion resistant finish. This cover maintains a clean Back Box until the pocket is finally installed. The protective cover may be discarded after the pocket has been installed. |
|
|
|
|
|
FINISHES |
|
|
POLYURETHANE ENCAPSULATION: Using ACE standard clear double zinc plated, corrosion resistant finished extra deep back boxes (SO), a 1/16” thick jacket of polyurethane is applied to the exterior sides and bottom of the Back Boxes permanently bonding with surfaces to form a moisture resistant seal (SOW).
|
|
|
|
|
|
MATERIALS |
|
|
STANDARD BACK BOX MATERIALS: ACE polyurethane encapsulated Extra Deep Back Boxes (#SOW) are made from tough, welded 14 gauge steel (.071" thick).
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: ACE polyurethane encapsulated Extra Deep Back Box Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Stage Pocket and Back Box products.
• Package 1 - Full Stage Pocket with Standard Lid + (1) #PNL-106 Panel + (1) #PE Panel + (1) #SO-200W Back Box
• Package 2 - Full Stage Pocket with Standard Lid + (1) #PNL-1212 Panel + (1) #SO-201W Back Box
|
|
|
|
|
|
NOT UL LISTED |
|
|
UL LISTED: UL Listed compliance Standard 514A in combination with inner floor pocket file FLOOR BOX 44LK.
|
|
|
|
|
 |
LINKS |
|
|
|
|
